YUMI (Your USB Multiboot Installer) is a Multiboot USB Boot Creator that can be used to make a Multisystem flash drive. This tool can quickly create a Multiboot bootable USB flash drive containing several different ISO files. Use it to boot from USB your favorite Live Linux portable Operating Systems, Linux and Windows Installers, antivirus utilities, disc cloning, backup, penetration testing, diagnostic tools, and much more. This Universal tool makes it easy for anyone to create their own customized multi purpose Bootable USB.
The YUMI App has been considered by many to be the Best Bootable USB Creator. It replaces our old Multiboot ISOS tool and is also the successor to the singular Universal USB Installer (UUI). Tools that were amongst the first ever made for the purpose of creating a bootable flash drive. For the most part, files are generally stored within the Multiboot folder. This makes for a nicely organized Portable Multiboot Drive that can still be used for traditional storage purposes.
Usboot Rar Y Boot Ini Rar Descargar
NOTE: I know you are probably asking, How can you boot from exFAT USB? A YUMI exFAT USB Boot variant is now available and recommended. It can be used to automatically create an exFAT boot USB. Here are the key differences between the variants:
You can use this version if your computer supports BIOS booting, and if you do not plan to run your Windows installers in UEFI mode. Most modern motherboards still have Legacy BIOS firmware support though CMS Legacy mode.
The YUMI UEFI variant utilizes GRUB2 for both BIOS and UEFI booting. It is important to note that the UEFI version is not backwards compatible with the legacy variant. In addition, your drive must be Fat32 formatted to support booting in UEFI mode. This boot creation software does include the fat32format utility to help you format drives larger than 32GB as Fat32.
YUMI (Your Universal Multiboot Installer) enables each user to create their own custom Multiboot UFD containing only the distributions they want. Presented in the order by which they are installed. A new distribution can also be added to the bootable device each time the tool is run.
Other Notes: If MultibootISOs was previously used, you must reformat the drive, and start over. The Legacy variant uses Syslinux directly, and chain loads to grub only if necessary, so it is not compatible with the older Multiboot ISO tool.
-wimboot option stores the extracted Multi Windows Installers in their own directory. -bootmgr option moves the bootmgr and bcd files to root of drive. (note: -bootmgr option does require a Windows Vista or later host to run bcdedit).
The Legacy variant does not natively include files to make it UEFI Boot from USB. However, it is still possible to boot and run your Windows Installers from UEFI. To switch between added Windows versions, navigate to the multiboot/win-directory (replacing win-directory with the Windows version you want to boot) on your USB. Once there, move the bootmgr, bootmgr.efi, and entire boot folder to the root of your USB drive. Then reboot, booting your computer from the UEFI compatible USB. If all went well, it should boot straight into your chosen Windows Installer.
Most added distributions are stored within the multiboot folder. This is also the root directory set for syslinux. In some cases, the Volume Label of your USB drive must be MULTIBOOT in order for OpenSUSE, CentOS and several other distributions to boot. YUMI will attempt to automatically create this Volume Label, however it can sometimes fail. So please ensure that the Volume Label of your USB remains MULTIBOOT if you expect your distributions to boot.
Legacy only:From the multiboot folder on your flash drive, delete the hidden file ldlinux.sys and then rename the libcom32.c32 file to _libcom32.c32. Then use YUMI to install any menu item. The installer will notice that the file is missing and will then attempt to reinstall syslinux and repair the master boot record. Once finished, rename _libcom32.c32 back to libcom32.c32.
* The Legacy variant does support NTFS, however not all distributions will boot from an NTFS formatted device. Though Windows to Go and distributions containing files over 4GB require using NTFS with the Legacy variant.
Persistently Saving Changes: YUMI uses the casper-rw persistence feature for some (but not all) Ubuntu based distributions. Yes, you can also have multiple persistent distributions, as each distro utilizes its own casper-rw file. * Persistence will not always work on NTFS formatted USB drives. Additionally, some distributions will not boot via NTFS.
Do you want to install or reinstall Windows 10 on your computer? Not sure how to prepare the bootable USB of Windows 10 without using third-party tools? In this step-by-step, we will see how to prepare the bootable USB of Windows 10 using the Command Prompt.
i have ubuntu in my thinpad.. but i want to remove ubuntu and install windows 7. it does not have dvd drive. i first formatted my usb drive. then pasted windows 7 prof. in it. restart the comp. and kept pressing f2. but did not show the booting message. the above method also did not work. is there any other options??
I placed the HD of the computer giving the error into an enclosure, cleared it, created a primary partition size=10240, made it bootable then copied Windows 7 to it. I popped it back in the original computer, booted to setup, created other partition and installed.
Followed the steps (even tried with Win 7 USB DVD download tool), boot priority is set to USB. But nothing happenes, disabled other boot options and it just skips to bios. Tried with multiple flashdrives, the USB socket must be working as well.
after i try to boot i get it to but when i start to install and it says i need a driver for my dvd drive and i dont know the make of my laptop to even get a driver. is there an alternative route around this?
i have no problem creating a bootable USB using part disk and copying bootsect.exe but it still will not boot from start up. I have a iso and the original disk and am unable to perform a clean install. I have used the disk to perform a clean install previously and it worked like a charm, i do not have a optical drive otherwise i would just use that instead.
Hi, thank you so much for this guide. I was stuck at step 7 (bootsect.exe) and what i did was to do the step 2 again: *Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
Titan Uranus, you are special, this guide shows you how to make a bootable USB copy of windows, so in the first place you would need to have the Windows files in order to create the bootable USB. Whether you have the original on CD or have downloaded a copy from the web, without the original files you would not be able to do this. So the moral to the story is, put your brain in gear before you type anything in future because you are only making yourself sound a little dim.
I tried to use 64bit windows bootcode from my 32bit windows, but got an error. But i fixed it easily. I simply used 32bit windows to create bootcode and then copied 64bit windows contents on my flashdrive.
Why would you want a bootable USB version if you have the disk in the first place!? got to the step where you ask to pop in the Windows 7 disk WHICH I DONT HAVE since i wanted to boot from USB. FFS Seen you had another guide you ripped off from another site. w/e was dumb
I tried following your guide and when I plugged the USB into my computer, it either tells me to put in something to boot from or it gives me a message about missing bootmgr.Also, FYI, yes, my boot priority is set to my USB drive.
Works perfect. I created many bootable USB using this method, however one thing I noticed that the format from CMD takes a lot of time to complete. Now I do all the steps except format it with windows.
Now, I want to save Recovery Image onto a USB stick (the file size is over 40G), so I bought a SanDisk 64G Extreme. I did not want to use two USB sticks, so I followed the step above and went through all steps without any errors like before, but the 64G drive is not recognized as a bootable drive. I tried on my desktop PC and the result is same.
Boot sector restoration toolsBootsect.exe updates the master boot code for hard disk partitions in order to switch between BOOTMGR and NTDLR. You can use this tool to restore the boot sector on your computer
i have done till assign and exit command on cmd..after that i dont have CD to install windows 7..I have the copy windows 7 CD in my D drive. So how can i install from there?inspite of writing D: CD BOOT wat else i have to write?i want to boot my computer through the copy of Windows 7 CD..whether i have to put that copy in pen drive or what?Please reply soon..
one problem is come in win7 all step is work but in last when you type the command bootsect.exe /nt60 and drive letter then its not work one natification comes(your drive is denaid)please tell me what is the problem
Followed the guide completely. Very simple and easy to use. My issues comes at the very end. I get an error just before copying the Windows 7 files. My error is:E:\boot>bootsect /nt60 G:Target volumes will be updated with BOOTMGR compatible bootcode.
i made usb bootable and when i install xp in laptop,after copying files ablue screen appeares n it tells dat run chkdsk /f facility and instalation cant proceed coj there may be sum virus in my pc or problem with hard drive
Hello. I dont have a windows installation disc, but i have downloaded the files onto my computer. Now i need to get it to boot from the flash drive but i dont have the bootsect file though. i have downloaded that too in C:\Users\SDAJ\DownloadsNow what should i do to load it?
i am trying to install windows 8. i dont ve a dvd drive so i try to install via pendrive i tried the above steps i had some doubts y i need to mention the CD boot, since my drive s not working i have to mention usb drive alone know ie my usb drive is j 2ff7e9595c